Frequent Asked Questions
Unopened silicone sealant should be stored indoors in a dry and cool environment, avoiding direct sunlight.
Cut the nozzle end at a 45 ° angle with an art knife. Apply sealant along the seam. Grasp the bottom of the sealing rubber tube with one hand and slowly squeeze the bottom of the tube to evenly apply sealant.
The silicone sealant used during the installation of glass is commonly known as glass adhesive. Silicone sealant has one component and two components, and glass adhesive is just one of them.
Silicone sealant usually takes 30 minutes to an hour to dry to the touch, but it needs to cure completely before it's waterproof and can be exposed to moisture.
Unsaturated silicone sealant can be wiped with a soft cloth, or dry cleaned with talcum powder or clean powder sand, and finally rinsed with water, which can basically remove residual adhesive. The cured silicone sealant should be soaked in banana water to soften it, and then wiped clean with a soft cloth.
Basically 5-10 Working days after the payment.
Yes, any doubt about the products, pls let us know.
That is what a factory always does, right? Any products about Silicone sealant, Polyurethane sealant, butyl hot melt adhesive,acrylic tape, flashing tape etc. you can let us know, the R&D department is always at your service.
That is what a factory always does, right? Any products about Silicone sealant, Polyurethane sealant, butyl hot melt adhesive,acrylic tape, flashing tape etc. you can let us know, the R&D department is always at your service.
Wow, it seems we have all you need, IATF16949; ISO14001; OHS18001.