Description
Screw thread adhesive, also known as anaerobic adhesive or mechanical adhesive. It does not solidify when in contact with oxygen or air, and once isolated from air, it quickly polymerizes into a cross-linked solid polymer.
The composition of thread adhesive is relatively complex, mainly composed of unsaturated monomers, as well as aromatic amines, phenols, aromatic hydrazine, peroxides, etc. The formula of thread adhesive is constantly evolving, and thread fastening adhesive is a commonly used non removable anti loosening measure in engineering.
| Product Name | Advance Auto Anaerobic Electrical Pipe PTFE Automatic Transmission Drain Plug Thread Sealant for Hydraulics |
| Characteristics of each model | T-222 Thread sealer: Suitable for low strength connections and easy to disassemble |
| T-243 Threadlocker sealant :Has the advantages of medium strength, detachable, and oil resistance | |
| T-263 thread locker:High strength, difficult to disassemble, and also has certain oil resistance | |
| T-270 thread sealant: Detachable and has a certain degree of lubrication. | |
| T271 thread locker adhesive:High strength, difficult to disassemble, with certain oil resistance | |
| T2701 thread adhesive:High strength, difficult to disassemble | |
| T-277 anaerobic adhesive:High strength, difficult to disassemble, suitable for large-sized bolts with coarse threads | |
| T290 bolt thread adhesive:Medium/high strength, low viscosity and permeability | |
| Specifications | 6ml/10ml/50ml/250ml Or customized |
| Complete curing time | 24 hours |
| Temperature tolerance | -54 ºC to 180 ºC |
| Colour | Blue, purple, red, yellow or customized |
| Application scenarios | Automotive repair, water pipe thread sealing, mechanical repair, electronic product repair, etc |
| Delivery time | 7-15 days |
Thread locker operation steps
Clean the threads: Use a clean dust-free cloth or brush to remove the dust and oil on the threads to ensure that the surface is clean and dry, so as not to affect the adhesion of the glue.
Opening preparation: Use a sharp blade to cut a small inclined cut in the thread sealant mouth (it should not be too large to avoid excessive glue overflow).
Apply glue evenly: Slowly rotate the screw, and lightly press the glue bottle at the same time, so that the thread glue evenly covers the threaded part (pay attention to controlling the dosage to avoid waste or dripping).
Assembly and fastening: screw the nut immediately, rotate it several times to make the glue distribute more evenly, and then let it stand until it is completely cured (refer to the glue instructions for curing time).
Hint:
Choose the appropriate threadlocker according to the working conditions (such as low-strength detachable type or high-strength permanent type).
Avoid glue from contacting skin or eyes during the operation. If you accidentally touch it, rinse it with clean water in time.
Thread adhesive, due to its unique anaerobic adhesive curing characteristics, can be applied in locking, sealing, fixation, bonding, plugging, and other aspects.
Thread sealant has become an indispensable liquid tool in the mechanical industry.
It has a wide range of applications in industries such as aerospace, automotive, mechanical, electronic, and electrical.
Tanyo Industry is not only good at manufacturing threadlocker but also specializes in providing construction sealant series, covering butyl sealants, polyurethane and silicone sealants, and other types. At the same time, it supplies various types of masking tape, duct tape, electrical tape, warning tape, door windows sealing strips, fireproof and sound insulation materials, and other supporting products. We use First-class service and favorable prices to help your project to the next level.
Anti-slip tape
Butyl tape
Foam tape Acrylic tape Self fusing tape
Brush sealing strip Door frame sealing strip Leak sealing tape
About Tanyo Industry Co., Ltd
Tanyo industry works asexpanded sealants solutions to various industries and key markets, including construction (Forroofing, surfacing, metal building, and fenestration), aerospace composites, and wind energyin China. Product ranges includesealants, adhesives, coatings, butyl sealant, roof flashing tape, and silicone sealant.
With TS16949 &ISO14001 Certification, Tanyo Industry is continuously developing products and solutions that create new opportunities for the company, its employees, and customers. Hope Tanyo can do something to assist your business better and better
Q:How to remove and disassemble anaerobic thread adhesive?
A:Liquid anaerobic adhesive can be removed with a chemical solvent; Medium and low strength models can be disassembled using tools such as wrenches;
If the high-strength model cannot be disassembled with tools such as a wrench, it needs to be heated by a hot air gun or a flamethrower to over 230 degrees Celsius while disassembling. The remaining colloid can be burned or removed with a steel wire brush.
Q: Why does anaerobic thread adhesive take a long curing time?
A: The solidification of anaerobic adhesive is influenced by metal materials, temperature, and oxygen-deficient conditions. Generally, at room temperature, the adhesive is initially solidified for 30 minutes (usually not easily twisted by hand) after oxygen deficiency in the thread gap of active metals (copper, iron, steel, etc.), and fully solidified after about 6 hours. It is recommended to put it into use after 24 hours, and the time is extended for inert metals or in winter.
Q: How long is the shelf life of anaerobic thread adhesive after opening the cover?
A : Anaerobic adhesive only solidifies under anaerobic conditions, and the adhesive does not solidify after opening the lid.
It can be stored and stored normally. Tanyo anaerobic adhesive has a shelf life of two years.
Q: Why is anaerobic thread sealant not full in the bottle?
A : The characteristic of anaerobic adhesive is anaerobic solidification, so the bottle is designed to be large and needs sufficient oxygen inside to be stored for a long time, but the adhesive inside is sufficient.
Q: What materials are suitable for anaerobic thread adhesive?
A : If used for thread anti loosening and sealing, both internal and external threads must be made of metal before they can be used;If used for fixing cylindrical parts (such as bearings), the joint surface must be made of metal before it can be used;In short, it can only be used for metal materials, and other materials cannot be bonded.
